Operating Instructions; The Control Panel - Blizzard Lighting MiniSystem Manual

4. OPERATING INSTRUCTIONS

The Control Panel

All the features and different modes possible with the minisystem™ can be
accessed by using the control panel buttons or IR remote control. The buttons
allow you to control the unit, as detailed below.
Note: You must turn the laser safety key switch to "ON" to use the lasers.
1 ON/OFF
2 MIC
3 VOL
4 MODE
(button)
5 SOUND
ON/OFF
(button)
MiniSystem™ Manual - Rev. A
Power switch
Internal microphone
Using a small phillips screwdriver, adjust clockwise for
high mic sensitivity, or adjust counter-clockwise for low
sensitivity.
Show 0: LED, Laser, and Strobe shows (random 1-3)
Show 1: LED show
Show 2: Strobe show
Show 3: Laser show
Switches between the following 3 options with each button
press: Fast, Slow, and Sound Active.
Fast: Cycles through show modes 0-3, fast. The LED
indicator flashes fast when active.
Slow: Cycles through show modes 0-3, slow. The LED
indicator flashes slowly when active.
Sound Active: Cycles through show modes 0-3, controlled
by sound. The LED indicator flashes with beat.
Page 8
© 2020 Blizzard Lighting, LLC