Adjustments For Pc Screen Display - Sharp PN-E703 Operation Manual

Adjustments for PC screen display

nAutomatic adjustment
When you use the D-SUB[RGB] or DVI-I (analog) to display a
PC screen for the first time, or when you change the setting of
the PC, use the automatic screen adjustment.
1. Switch the input to D-SUB[RGB] or DVI-I (analog) and
display the adjustment pattern. (See the description
below.)
MENU
2. Press and use
menu.
ENTER
3. Press and select "AUTO".
ENTER
4. Press .
The automatic adjustment is complete in several seconds.
MENU
5. Press to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment two
or three times. Try manual adjustment if necessary.
nScreen display for adjustment
Before making adjustments in the SCREEN menu or
PICTURE menu, display an image to brighten the entire
screen. If you are using a Windows PC, use the adjustment
pattern on the supplied CD-ROM.
Opening the adjustment pattern
The following example is performed in Windows 7.
1. Load the supplied CD-ROM into the computer's CD-
ROM drive.
2. Open [CD Drive] in [Computer].
3. Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is finished, press the [Esc] on the
computer's keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• If the display mode on the computer you are using is
65,000 colors, the color levels in the color pattern may
appear differently or grayscale may appear to be colored.
(This is due to the specifications of the input signal and is
not a malfunction.)
or to display the SCREEN
Menu Items
31
E