Table of Contents
Advertisement
Menu Items
Adjustments for PC screen display
nAutomatic adjustment
When you use the PC analog RGB input terminal or PC
analog RGB input terminals (BNC) to display a PC screen for
the first time, or when you change the setting of the PC, use
the automatic screen adjustment.
1. Switch the input to ANALOG1 or to ANALOG2 and
display the adjustment pattern. (See the description
below.)
2. Press
to display the ADJUSTMENT menu.
3. Press
and select AUTO.
The automatic adjustment is complete in several seconds.
4. Press
6 times to close the menu screen.
TIPS
• If the screen cannot be adjusted properly with one
automatic adjustment, repeat the automatic adjustment 2 or
3 times. Try manual adjustment if necessary.
nScreen display for adjustment
Before making adjustments in the ADJUSTMENT menu
or GAIN CONTROL menu, display an image to brighten
the entire screen. If you are using a Windows PC, use the
adjustment pattern on the supplied CD-ROM.
Opening the adjustment pattern
1. Load the supplied CD-ROM into the computer's CD-
ROM drive.
2. Open the CD-ROM in [My Computer].
3. Double-click [Adj_uty.exe].
The adjustment pattern will appear.
Adjust the screen automatically or manually.
4. When adjustment is finished, press the [Esc] on the
computer's keyboard to quit the adjustment program.
5. Eject the CD-ROM from the CD-ROM drive.
TIPS
• If the display mode on the computer you are using is
65,000 colors, the color levels in the color pattern may
appear differently or grayscale may appear to be colored.
(This is due to the specifications of the input signal and is
not a malfunction.)
10
E
Advertisement
Table of Contents
