Sharp PN-E703 Operation Manual page 58

Specifications
nPower management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor's power management function to work.
DPMS: Display Power Management Signaling
DPMS Screen
ON STATE Display
STANDBY
No
SUSPEND
display
OFF STATE
*1 Upper value: PN-E703, Lower value: PN-E603.
*2 When AUTO INPUT CHANGE is set to OFF.
nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
58
E
Power
Hsync Vsync
*1
consumption
225 W
Yes Yes
180 W
No Yes
2
1.0 W*
Yes
2
1.0 W*
No
DMPM: Digital Monitor Power Management
DMPM
Monitor ON
Active OFF
No
No
Power
Screen
*1
consumption
225 W
Display
180 W
2
1.0 W*
No display
2
1.0 W*