Basic Operation - Sharp PN-E703 Operation Manual

2
5
6
9
10
1. INPUT (Input mode selection)
The menu is displayed. Press
ENTER
mode, and press
* You can select the input terminal by pressing the input
switch of the monitor.
Input mode
DVI-I
DisplayPort
HDMI1[PC]
HDMI1[AV]
HDMI2[PC]
HDMI2[AV]
D-SUB[RGB]
D-SUB[COMPONENT]
D-SUB[VIDEO]
*1 Select the terminal to be used in HDMI1 of INPUT
SELECT. (See page 24.)
*2 Select the terminal to be used in HDMI2 of INPUT
SELECT. (See page 24.)
*3 Select the terminal to be used in D-SUB of INPUT
SELECT. (See page 24.)
*4 Select the terminal for AUDIO SELECT which is used for
audio input. (See page 24.)
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to the
previous level.
3. MENU
Displays and turns off the menu screen. (see page 20.)
18
E

Basic Operation

1
3
4
7
8
or to select the input
to enter.
Video
DVI-I input terminal
DisplayPort input terminal
PC/AV HDMI1 input
terminal *1
*4
PC/AV HDMI2 input
terminal *2
PC/AV D-sub input
terminal *3
4. VOL +/- (Volume adjustment)
Pressing
menu screen is not displayed.
V O L U M E
Press or
* If you do not press any buttons for about 4 seconds, the
VOLUME menu automatically disappears.
5. BRIGHT +/- (Brightness adjustment)
Pressing
menu screen is not displayed.
B R I G H T
Press or
* If you do not press any buttons for about 4 seconds, the
BRIGHT menu automatically disappears.
6. ENTER
Confirms the setting.
7. RETURN
Returns to the previous screen.
8. SIZE (Screen size selection)
The menu is displayed.
Audio
Press or
9. DISPLAY
Displays monitor information.
The display changes from INFORMATION1 →
INFORMATION2 → clear display, and so on every time you
press this button.
• The display disappears automatically after about 15
seconds.
• is displayed during LAN communication.
LAN
• If is displayed in red, there is a duplicate IP address.
LAN
10. MODE (Color mode selection)
Each time you press this button, the color mode changes in
the following order:
STD (Standard) → VIVID → sRGB →
HIGH ILLUMINANCE → STD...
• HIGH ILLUMINANCE is a display with colors suited to
bright locations.
• sRGB applies to PC input only.
sRGB is international standard of color representation
specified by IEC (International Electrotechnical
Commission). Color conversion is made in taking account
of liquid crystal's characteristics and represents color tone
close to its original image.
or displays the VOLUME menu when the
15
to adjust the volume of the sound.
or displays the BRIGHT menu when the
15
to adjust the brightness.
to select the screen size. (See page 19.)