Putting The Product Into Operation; Setting Current Time And Day Of Week - Parkside HG04678 Operation And Safety Notes

when programming. Evaporation and water consumption is
lowest early in the morning or late in the evening.

Putting the product into operation

1. Insert batteries to the item as described in the chapter
"Inserting / replacing batteries".
2. Connect the water timer to water tap (see Fig. D).

Setting current time and day of week

1. Press button
you just insert batteries).
The hour display in the "Time" section will flash on
screen (see Fig. 1).
2. Set the time in hours with the rotary control
9 hour) and confirm with the
The minute display in the "Time" section will flash on
screen.
3. Set the time in minutes with the rotary control
30 minutes) and confirm with the
The cursor in the "day of the week" section will flash
on screen.
4. Set the day of the week with the rotary control
confirm with the
for approx. 2 seconds (not necessary if
3
button
button (see Fig. 4).
3
(For example
5
(see Fig. 2).
3
(For example
5
button (see Fig. 3).
3
5
and
GB 23