• What Can I do with my Camera? Capture Set Up Communicate • What can I do with my Digital Pictures? View Save Communicate • What can I do with my audio and video clips? Playback Save Communicate • Camera Package Contents AQ 1300 Waterproof Case Rubber Strap...
• Attaching the Rubber Strap • Battery Guidelines • Never use manganese batteries. • Battery life differs greatly by manufacturers. • Battery life is greatly affected by how much you use the flash, Operation LCD and other functions, and how long you leave the power turned on. •...
• Checking Camera Status Switch the camera on, view the camera LCD screen to check which camera settings are active. If the feature icon is not displayed, it means that particular feature is not activated. Picture Quality High resolution Medium resolution Low resolution Battery Full battery...
3 Taking and Managing the Pictures Before you take pictures, please read this note first: NOTE: Never remove batteries from the camera, or unplug the adaptor while a picture is being saved. Doing so will prevent the current picture being saved and may corrupt other pictures already stored in the memory. •...
• Setting Self-timer Your camera is designed with a self-timer function which will allow you to take pictures with the 10 second built-in timer. Self-timer function is only applied to next picture. Please place the camera on a flat surface or use a tripod (not included) for the Self-timer function.
5 Managing Pictures, Audio and Video Clips • Deleting last Picture, Audio or Video Clip 1. Turn on the camera. 2. Press Menu button five times, the Status LCD shows the no. of pictures, audio and video clips stored in the internal memory and the icon “...
• Using the Rubber Ring Please check the rubber ring before using. Check for any dirt, grains of sand, hair, dust, salt, thread scraps in the rubber ring and wipe off with a soft cloth or tissue paper. Apply a coat of grease onto the rubber ring •...
4. We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal pictures. Remember to format a memory card if it was used in another digital camera or other devices. 7 Using SMC Card...
1. Before you begin, close all other software applications opened on your computer. 2. Insert the CD supplied into the computer CD-ROM Drive. 3. Double click the CD-ROM icon “Digital Camera”. 4. Install the software included. • Software included with your camera The AQ 1300 software CD contains the following software;...
Adobe® Acrobat® Reader .PDF File Reading Software Adobe® Acrobat® Reader lets you view and print Adobe Portable Document format (PDF) file on all major computer platforms, as well as fill in and submit Adobe PDF forms online. Microsoft® Netmeeting™ Web Cam software NetMeeting™...
For Macintosh® Users: Transfer pictures, audio and video clips to Mac 1. Install the AQ1300 Digital Camera driver. 2. Copy the application to the local hard disk. 3. Run the SimpleUpload 1.0, then you can upload one file or all files to Mac from the AQ1300 Camera.
10 Using Your Camera as a Web Cam • Setting up NetMeeting™ 1. Connect your AQ 1300 to the PC with the USB cable. 2. Put your AQ 1300 on top of your PC monitor or another flat surface. 3. Connect your microphone (not included) and speaker (not included) to your audio card’s Mic in & Speaker out jack respectively.
Solution Shut down all other applications and attempt to re-install the driver, or download the updated driver from www.cool-icam.com and install the updated driver. Check the USB controller in your BIOS if they are activated. If these does not work contact your national Customer Support representative.
Page 17
Driver. Solution Shut down all other applications and attempt to re-install the driver, or download the updated driver from www.cool-icam.com and install the updated driver. Upload all images to your Mac as soon as possible. (Please refer to Battery Guidance section in User’s Manual.)
• Cool-iCam Online Services Website: http://www.cool-icam.com • Customer Support If you have any problem with this product, we want to help. For immediate assistance, please phone the Hotline, send e-mail to the support e-mail address or write to the address shown on the warranty card enclosed.
Flash Light Specification: Effective Distance: 3.3 - 8.2 feet Waterproof Case: Depth underwater: 98 feet (Maximum) • Using your batteries WARNINGS! • Batteries should be replaced by an adult. • Do not mix different types of batteries or new and used batteries. •...
Storage • To keep the waterproof seal in good condition during storage, do not fasten the catch after closing the waterproof case. • Protect the waterproof seal from dust or scratches during storage. • Do not store the waterproof case in hot, cold or humid places, or near substances such as naphthalene or insecticides.
Need help?
Do you have a question about the CIC-221 and is the answer not in the manual?
Questions and answers