User’s Manual 1. Introduction Congratulations on purchasing the Micro C@m. Using the latest innovations in technology the Micro C@m offers fun, affordable and easy to use digital imaging. Although you probably want to get started right away, please take a few minutes to read this guide and familiarise yourself with your new Micro C@m.
5.3 How to install Microsoft® NetMeeting™ ... 5 5.4 How to install Adobe® Acrobat® Reader ... 5 For Macintosh® Users: 5.5 How to install the Digital Camera Driver Software ... 5 5.6 How to install ArcSoft® Software ... 6 5.7 How to install Cu-SeeMe™ ... 7 5.8 How to install Adobe®...
Notes: Uninstalling your Digital Camera Manager does not delete your album folders and therefore all images transferred into your default or created albums will be preserved. You will be able to access these folders on your system desktop. For Windows® Users: 5.2 How to Install ArcSoft...
5.5 How to Install Digital Camera Driver Software Notes Important: Macintosh® users may only choose one type of driver at a time to install (digital camera driver with or without enhancement). The driver cannot run properly if both driver are installed.
5.5.2 How to Uninstall Digital Camera Driver (without enhancement): To uninstall the Digital Camera Driver (without enhancement), you have to remove 2 files located in different folders and restart your Mac. The 2 files are listed below. “STV0680 Camera” in Control Panel Folder “STV0680 Downloader”...
5.7 How to Install Cu-SeeMe™ 1. Insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM drawer. 2. Double click the CD-ROM icon “Digital Camera”. 3. Double click the “Cu-SeeMe™1.0b10” folder, followed by the “Cu-SeeMe™1.0b10” icon. 4. Follow the instructions presented on the screen to complete the installation.
7. Getting to Know Your Micro C@m Refer to the picture below for a quick overview for your Micro C@m. Front View Shutter button (7.1) Mode Button (7.4) 7.1 Shutter Button The Shutter Button has 5 functions. Although these are covered in more detail later in this manual, please find below a brief description.
7.5 Power 7.5.1 Stand-by Mode After a period of 30 seconds inactivity, the Micro C@m will switch to Stand-by Mode automatically and the LCD will go blank. All images taken will not be lost as they are stored in the Micro C@m’s memory. Important Notes: It is important to note that any images stored in your Micro C@m’s memory will be lost if the battery is totally drained or removed (and the USB cable is not connected to your Micro C@m to your powered on PC or Mac).
8.1 Switching the Micro C@m On Your Micro C@m will automatically switch on when you insert new batteries or connect your Micro C@m to your PC via USB port. Press the Mode Button to turn on your Micro C@m when your Micro C@m is in Stand-by Mode. The LCD will indicate the be taken.
9. Connecting your Micro C@m to Your Computer The USB cable allows you to upload images from the Micro C@m to your PC or Mac. One end of the cable connects to the USB port on the side of the Micro C@m and the other end connects to your PC’s or Mac’s USB port.
2a. Capture all stored images You are now able to enhance the resolution of your taken images by using the Digital Camera Manager. Before you start to capture all stored images, a window will pop up and ask you if you want to convert all the stored images to High Resolution (640x480) automatically.
High Resolution supports 20 frames of video. • When the Micro C@m is full, attach it to your PC via USB and run the Digital Camera Manager. • You can now start to create your own movie clips by following these steps: 4.
4. Click the button to adjust the frame rate and the clip. 5. Click to start record the live images and click during recording by clicking the and it will be saved to the To adjust frame rate: You can adjust the frame rate (number of frame per second) by pressing the Enter the number of seconds you want for the video clip to run at.
Important! Make sure your Digital Camera is connected to your computer. 4. The image(s) stored in your Digital Camera will be shown in the window. To capture image(s), highlight the wanted image(s) and click “Capture”.
7. Click “5. Print Preview” to print a hard copy. Using live images:- 8. You can also capture a live shot when your Digital Camera is connected to your PC by the following steps: 9. Go to “Get Template” to select the template and then press “OK” to confirm.
Adding an existing video. Step 6 To add a video you have already made double click on the next large frame in the story board to the right. Click on the “Get” icon and select a video you had made and filed in the folder called “album”...
1. Double click the “Funhouse 1.0” icon from the Funhouse™. 2. Click “1. Get Template” to select the template from the category and then click “OK” to confirm. Important! Make sure the “Digital Camera” CD-ROM is in the CD-ROM Drive. Using the images stored in your Digital Camera:- 3.
Step 5 Double click on the next right large frame and repeat step 3 using a video template double click template 5. Countdown.avi. Repeat step 4. Static.avi 1. Fire Adding an existing video. Step 6 To add a video you have already made double click on the next large frame in the story board to the right.
WWL UK Unit 14, Distribution Centre. Shannon Ind. Est., Shannon, Co. Clare, Ireland Tel : 353-61-702097 Website : www.cool-icam.com Support email : wwl@wwluk.com 13. ArcSoft For Japan ArcSoft Japan Support Centre (Tokyo) ® Tel: +81-03-3834-5256 Fax: +81-03-5816-4730 Web: http://www.mds2000.co.jp/arcsoft E-mail: japan@arcsoft.com support@mds2000.com...
The CD-ROM is disconnected. Problem Shut down all other applications and attempt to re- install the driver, or download the updated driver from www.cool-icam.com and install the updated driver. Check the USB controller in your BIOS if they are activated.
Page 22
Problem Shut down all other applications and attempt to re- install the driver, or download the updated driver from www.cool-icam.com and install the updated driver. Install the software, restart your Mac, and finally, connect the Micro C@m to the Mac via the USB port, then the plug-in file and folder will appear in the Hard disk.
Important Note: We strongly recommend that you do not use rechargeable batteries as this will affect the performance of your Micro C@m. WARNINGS! • Batteries should be replaced by an adult. • Non-rechargeable batteries are not to be recharged. • Rechargeable batteries are to be removed from the camera before being charged (if removable). •...
17. FCC Notice This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Need help?
Do you have a question about the CIC-150 and is the answer not in the manual?
Questions and answers