cecotec Power Instant-ccino 20 Instruction Manual page 22

Hide thumbs Also See for Power Instant-ccino 20:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
ENGLISH
7.
Press the button (16) to switch on the device and preheat the water. The control panel will
flash during the heating process.
8.
Place a suitable cup below the coffee outlet (14) and the milk tank's nozzle.
9.
As soon as the device has heated up, the control panel will stop flashing. Press the button
(23) for cappuccino or the button (19) for latte macchiato, the machine will produce a beep,
and the selected button will flash.
10.
Once the coffee is ready, the machine will produce a beep, the control panel will light up
again and the device will automatically switch to stand-by mode.
Milk Froth
1.
Fill the water tank (2).
2.
Fill the milk tank (9).
3.
Fold out the milk tank's nozzle (8) using the lever (7) (Picture E). Use the milk froth knob (5)
to adjust milk froth. (5).
4.
Press the button (16) to switch on the device and preheat the water. The control panel
flashes during the heating process.
5.
Place a suitable cup below the milk tank's nozzle.
6.
As soon as the device has heated up, the control panel will stop flashing. Press the milk
froth button (21), the machine will produce a beep, and the selected button will flash.
7.
Once the coffee is ready, the machine will produce a beep, the control panel will light up
again and the device will automatically switch to stand-by mode.
Note: the device will remain in operation and the control panel will be lighted up for up to 30 minutes
after the last operation. During this time, the cup warmer (15) is heated. Once 30 minutes have
elapsed, the device needs to be switched on again using the button (16) to prepare another coffee.
Note: the coffee process can be stopped at any moment by pressing the selected coffee button
again. This will switch the device to standby mode.
COFFEE CUSTOMIZATION
The machine includes a customization function which allows selecting the exact amount of
coffee and milk for each coffee, saving the desired settings for future uses.
The set quantities are saved until a new quantity is set.
Espresso, double espresso, milk froth
1.
Fill the coffee or milk tank, depending on the drink to be prepared, as it is explained in the
previous section.
2.
Long press the selected coffee button (2 beeps) until you have the desired amount of coffee
or milk.
22
POWER INSTANT-CCINO 20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

01506

Table of Contents