Information Codes - Samsung NQ50K3130 Series User Manual

Problem
The oven does not The oven door is
cook properly. frequently opened during
cooking.
The oven controls are not
correctly set.
The grill or other
accessories are not
correctly inserted.
The wrong type or size of
cookware is used.
NQ50K3130BS_EE_DG68-00523H-00_SV+NO+FI+DA+EN.indb 33
Cause Action
Do not frequently open
the door unless you are
cooking things that need
to be turned. If you open
the door often, the interior
temperature will be lowered
and this may affect the
results of your cooking.
Correctly set the oven
controls and try again.
Correctly insert the
accessories.
Reset the oven controls or
use suitable cookware with
flat bottoms.

Information codes

If the oven fails to operate, you may see an information code on the display.
Check the table below and try the suggestions.
Code Description
The temperature sensor is open.
C-20
The temperature sensor is short.
If there is no communication
C-F0
between the main and sub MICOM.
Only occurs during EEPROM Read/
C-F1
Write.
This code appears when the oven
temperature high.
In case the temperature rises
C-21
over the limit temperature during
operation of each mode. (Fire
sensed.)
C-F2
The touch key is malfunction.
C-d0
Action
Unplug the power cord of
the oven, and contact a local
Samsung service centre.
Unplug the power cord for
cooling enough time, and
restart the microwave oven.
Press Stop ( ) to try again.
Unplug the power cord for
cooling enough time, and
clean the button. (Dust, Water)
When appear same problem,
contact a local Samsung
service centre.
English 33
2016-04-15 12:01:15