Language Selection - nVent RAYCHEM TCONTROL-05 Manual

Button or button
combination
(permanent)
Back short (< 2 s) Function configurable
Back long (> 2 s)
Menu/OK short
(< 2 s)
Up + Down long
(> 2 s)
+
Down + Menu/OK
very long (> 5 s)
+
4.2

Language selection

After switching on the device for the first time, the user can
either confirm the flashing displayed language with "OK" or
select another language using the "Up"/"Down" buttons and then
confirm this with "OK".
If, at a later point, another user is to also have the option of
selecting a language, the configuration parameter "Language
selection active" must be set to "Yes" (Configuration > System
data). After applying the language, this parameter is automatically
set to "No", so that language selection is not necessary the next
time the device is switched on.
The language of the device texts can be changed at any time in
the configuration settings (regardless of language selection after
switch-on).
22 | nVent.com/RAYCHEM
In basic status
(default setting:
without function)
Function configurable
(default setting: switch
to manual mode / end
manual mode)
Call up main menu
Start/stop autotuning
Call up menu for level
inhibit
Function
When When editing
navigating
Move to Leave editing
menu level mode without
above changes
--- ---
Call up Leave editing
sub-menu mode with
or switch changes
to editing
mode
--- ---
--- ---