Rs485 Interface; Voltage Supply; Galvanic Isolation - nVent RAYCHEM TCONTROL-05 Manual

3.3.5 RS485 interface

Input
Option 1 (alternative to digital
output 4):
RS485 interface

3.3.6 Voltage supply

Version (see nameplate)
AC 110 to 240 V
AC/DC 20 to 30 V
NOTE
No separate voltage supply is required for configuring using the
setup program as the device is supplied via the USB interface
(USB-powered). For a device in format 108H, 108Q, or 104, in this
case the standard digital outputs are activated and the digital
outputs of the options are deactivated.
3.4

Galvanic isolation

Analog input
Digital input/
output
(logic output)
Digital input
Ethernet interface
(option)
Setup interface
(USB)
Voltage supply
1. The voltage specifications correspond to the test voltages
(alternating voltage, rms values) according to EN 61010-
1:2011-07 for the type test. Type 702110 (format 132): 3000
V instead of 3510 V.
2. Functional galvanic isolation for the connection of SELV or
PELV circuits.
Symbol and terminal designation
RxD/TxD+
RxD/TxD-
Symbol and terminal designation
3510 V
(3000 V)
3510 V
(3000 V)
(2)
3510 V
(3000 V)
(1)
11
12
L1 L1
N
N
L+
L+
L-
L-
(1)
Relay
(1)
Relay (option)
(2)
PhotoMOS relay (option)
Logic output (option)
(2)
Analog output (option)
(2)
RS485 interface (option)
nVent.com/RAYCHEM | 19
®