Connection Elements - nVent RAYCHEM TCONTROL-05 Manual

fuse-protected as per the maximum admissible relay current
(see technical data).
• The device is not suitable for installation in potentially
explosive areas.
• In addition to a faulty installation, incorrectly set values
on the device can also impair the correct function of the
downstream process. Therefore, ensure that safety
devices independent of the device, e.g., overpressure valves
or temperature limiters/monitors, are present and that
it is only possible for qualified personnel to define settings.
Please observe the corresponding safety regulations in
this context.
References to other information
• The electromagnetic compatibility conforms to the standards
and regulations cited in the technical data.
• In general, please observe the specifications regarding
electrical isolation.
Setup interface
• The setup interface (USB) is not intended for a permanent
connection. Always disconnect the USB cable from the
device as soon as you have finished working with the
setup program.
3.2

Connection elements

Dimension: 48 mm × 48 mm
(1)
11 12
L1(L+) N(L-) 1
5 6 7 8 9 10
13 14
2 3 4
Setup
nVent.com/RAYCHEM | 15
(2)