Connection Diagram - nVent RAYCHEM TCONTROL-05 Manual

Terminals
1, 2
3, 4
5-8
8, 10
9, 10
11, 12
13, 14
L1(L+), N(L-) Voltage supply
Setup (USB) PC (setup program)
3.3

Connection diagram

CAUTION!
In unfavorable conditions, the temperature may exceed 60°C at
the terminals. and to take measures to prevent it.
As a result, the insulation of the cables connected at the
terminals may be damaged.
The affected cables must be heat-resistant up to at least 80°C.
NOTE!
There is an individual connection diagram on the housing that
corresponds to the ordered device version.
16 | nVent.com/RAYCHEM
Connection
Output 1 (relay)
Output 2 (relay)
Analog input
Input 2 (for potential-free contact)
Input 1 (for potential-free contact) or output 3 (logic output)
(1) = option 1: output 4 (relay, logic output) or RS485 interface
(2) = option 2: output 5 (relay, logic or analog output)