AEG BN071436DH User Manual page 16

16 www.aeg.com
Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch
Immediately touch
Immediately touch
heat setting comes on. After 3 seconds
comes on.
To deactivate the function: touch
PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: touch
To deactivate the function: touch
.
Timer
• Count Down Timer
You can use this function to set the
length of a single cooking session.
First set the heat setting for the cooking
zone, then set the function.
To set the cooking zone: touch
repeatedly until the indicator of a cooking
zone appears.
To activate the function or change the
time: touch
the time (00 - 99 minutes). When the
indicator of the cooking zone starts to
flash, the time counts down.
( comes on).
( comes on).
until the correct
. comes on.
or of the timer to set
To see the remaining time: touch
set the cooking zone. The indicator of the
cooking zone starts to flash. The display
shows the remaining time.
To deactivate the function: touch
set the cooking zone and then touch
The remaining time counts down to 00.
The indicator of the cooking zone
disappears.
When the countdown ends,
an acoustic signal sounds
and 00 flashes. The cooking
zone deactivates.
To stop the sound: touch
• Minute Minder
.
You can use this function when the hob
is activated and the cooking zones do
not operate. The heat setting display
shows .
To activate the function: touch
then touch
the time. When the time finishes, an
acoustic signal sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
and then touch
or
counts down to 00.
The function has no effect
on the operation of the
cooking zones.
STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
.
or of the timer to set
.
. The remaining time
to
to
.
and
.
.