Delivery, Transport, Storage; Transport And Storage; Delivery/Unloading; Prerequisites For Installation - SystemAir SAVE VSR 150/B Installation Instructions Manual

GB
5

Delivery, Transport, Storage

5.1

Transport and storage

The SAVE VSR 150/B should be stored and transported in such a way that it is protected against physical damage. It
should be covered so dust, rain and snow cannot enter and damage the unit and its components.
Important
• Use the packaging exclusively as transport protection and not as a lifting aid.
• Load and unload the air handling unit carefully.
5.2

Delivery/Unloading

The appliance is delivered in one piece containing all necessary components, wrapped in plastic on a pallet for easy
transportation.
Checking delivery
• Check the packaging and the air handling unit for transport damage. Any findings should be noted on the cargo
manifest.
• Check completeness of the delivery.
Verify that all ordered equipment is delivered before starting the installation. Any discrepancies from the ordered
equipment must be reported to the supplier of Systemair products.
Warning
When opening the transport packaging, there is a risk of damage from sharp edges, nails, staples, splinters
etc.
Unpacking
• Check the air handling unit for visible transport damage.
• Only remove the packaging shortly before assembly.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
6

Prerequisites for Installation

To ensure a proper and fail-free operation, it is important that the unit is installed according to these instructions.
The unit can be installed in the following positions.
A. Ceiling installation. Left and right connections are possible.
The enclosed mounting brackets are to be used.
212964 | v3.1
Fig. 3 Possible installation positions
Delivery, Transport, Storage |
9