Table of Contents
Advertisement
/etc/config/syslog
A reboot or a manual system state cycle is needed for the change to take effect.
Only the following parameters in the configuration file are recommended to be changed by the
user, if desired.
The user should not change other parameters that are not documented here:
Configuration Item
config syslogd
option enable
option ipaddr
option port
option size
option type
option loglevel
option mark
option directory
option time
option
disc_capacity
MW-1000™
Note:
/mnt/usbdrive/systemlogs
Value
1
256
7
0
/nojournal/systemlogs/
0
70
logs SML files into USB drive while changing option log_dir to
MW-1000™ User Guide
Description
1: Enable logging system-logs
0: Disable logging system-logs
In lab-conditions, provide remote-machine
IP-address to remotely log the MW-1000's
syslog information.
Remote-machine's port-number, for logging
syslog information
Maximum file size in KB, 0 unlimited.
0: Log only system-critical messages
7: Log all information messages
Specify the disc-location for writing syslogs
Maximum time a file can grow (minutes), 0
unlimited. Post the max-time, a new file is
generated.
The percentage of maximum disk capacity
allowed. All syslog logging is disabled once
the configured disc-capacity is reached.
26
Advertisement
Table of Contents
