Table of Contents
Advertisement
MW-1000™ Getting Started
5
This section describes the procedures to get the
up.
5.1
Accessing Methods
MW-1000™
After power up, the
MW-1000™
The
can be accessed from any PC or laptop using ssh.
To Access using SSH:
ssh
root@192.168.100.1
Password:5@G3p9axINJA
5.2
Status Indication
The following table displays the details about the LED status indicators
LED Name
PWR
TX
USB
5.3
Default Configuration
DSRC radio 1 (ath0): This radio is configured in channel switching mode to listen for WSAs and
connect to RSE if the requested service is available.
DSRC radio 2 (ath1): This radio is configured in the continuous channel access for channel 172
which is configured by default. Different channel can be used by changing configuration file. BSM
transmission and reception happens on this radio.
comes up with a default IP of 192.168.100.1.
Indication
On
Off
Off
Blinking (As per the Tx rate)
On
Off
11
MW-1000™ User Guide
MW-1000™
started after installation and power
Description
The device is powered on.
The device is powered off.
BSMs are not transmitting.
BSMs are transmitting.
Mounted
Not mounted
:
Advertisement
Table of Contents
