Table of Contents
Advertisement
1609.3 Configuration Items:
Parameter
BSMUnsecurePSID
BSMSecurePSID
1609.4 Configuration Items:
Parameter
BSMChannelMode
BSMContinuousChanNum
SAE J2735 Configuration Items:
Parameter
Basic Safety Message Part 1 Configuration
BSMEnabled
BSMPartITxInterval_ms
BSMTxNoPosAvailable
HeadingLatchSpeed_kph
HeadingUnlatchSpeed_kph
Value
Range
0x20
0x00, 0xEFFFFFFF
0x20
0x00, 0xEFFFFFFF
Value
Range
0
0,2
172
172, 184
Value
Range
1
0,1
100
50, 1000
0
0,1
4
0.0, 10.0
5
0.0, 10.0
MW-1000™ User Guide
Description
PSID that should be used when
transmitting Unsecure BSMs.
1 byte: 00 - 7F
2 bytes: 8000 – BFFF
3 bytes: C00000 – DFFFFF
4 bytes: E0000000 - EFFFFFFF
Secure PSID to sign BSM messages.
Description
0: Continuous Channel
1: Channel Switch Alternating Forced
2: Channel Switch Alternating Conditional
Channel number to use when 'Channel
Mode' is set to '0'.
Even channel number applicable to 10
MHz channels.
Odd channel numbers applicable to 20
MHz channels.
The channel number and channel modes
should be identical to the application,
which run on the same interface.
Description
Enables / Disables support for transmitting
a
0: False
1: True
BSM Transmit interval
Valid Values:
50, 100, 200, 300, ...,1000 ms
Enables / Disables transmitting a BSM if no
GPS position (indicated by the 3D fix value)
is available.
0: False
1: True
Speed, in kph, below which the heading
will be latched.
Speed, in kph, above which heading will be
21
Advertisement
Table of Contents
