Configuring Mw-1000 Software Settings; Most Important Configurations - Savari MW-1000 User Manual

6 Configuring MW-1000 software settings

Configuration section provides you with most-important configurations and advanced
configurations settings for MW-1000
Note: All the configuration changes will be applicable only when you reboot
otherwise specified.
6.1

Most important configurations

Most important configuration parameters are listed below
Configuration Item
Wireless Configuration.
ssid
wpa_passphrase
wpa_key_mgmt
DSRC configurations.
TxDataRate_Mbps
TxPwrLevel_dBm
DSRC applications configurations
BSMSecurityEnable
BSMPartITxInterval_ms
BSMContinuousChanNum
™
device.
Value Description
File-path: /etc/config/hostapd-minimal.conf
SavariHMI Sets the name (SSID = service set identifier) of the
network
SavariSafetyAp These establish what the pre-shared key will be for
plications wpa authentication.
WPA-PSK This controls what key management algorithms a
client can authenticate with.
File-path: /etc/config/v2vi_obe.conf
6 – 54 Configuration parameter is twice the actual 10 MHz
(default: 12) channel rate (i.e., 12=6Mbps)
Configuration parameter is the actual 20 MHz
channel rate (i.e., 12=12Mbps)
Valid values: 6, 9, 12, 18, 24, 36, 48, 54
0 – 33 Valid values: 0 to 33 in increments of 1 dBm.
(Default: 23)
File-path: /etc/config/v2vi_obe.conf
0,1 Enables / Disables the security functionality.
(Default: 1) 0: Disable
1: Enable
50, 1000 BSM Transmit interval
(Default: 100) Valid Values:
50, 100, 200, 300, ...,1000 ms
172, 184 Channel number to use when 'Channel Mode' is set
(Default: 172) to '0'.
Even channel number applicable to 10 MHz
channels.
Odd channel numbers applicable to 20 MHz
channels.
The channel number and channel modes should be
14
MW-1000™ User Guide
MW-1000™
, unless