Table of Contents
Advertisement
RESTORING FACTORY DEFAULT SETTINGS
To restore the default settings in your camera:
1. In the Setup Menu, press
2. Press
or
to highlight No or Yes, and then press OK to confirm.
• If No is selected, no change is made. The LCD returns to the previous screen.
• If Yes is selected, the LCD shows "Are you sure?"
3. Press
or
to highlight Yes or No, then press OK.
• If No is selected, no change will be made. The LCD returns Setup page.
• If Yes is selected, the camera will be reset to the factory default setting. The LCD will show "Restoring...."
and then return to setup page. The Default settings will be restored.
The table below lists the default settings:
OPTION
Camera Mode
Image Size
Quality
Flash
White Balance
LCD Brightness
Scene Selection
Digital Zoom
Exposure Compensation
ISO
Metering
Photo Effect
Time Out
Slide show interval
Beep
Quick View
AF Mode
Continuous Repeat
AF Assist Light
TV Mode
Date/Time Format
RESTORE THE CAMERA TO FACTORY DEFAULT SETTINGS
or
until Restore Default is highlighted.
DEFAULT STATUS
Single Shot
2048 x 1536
Normal
Auto Flash
AWB
Center (0)
OFF
Yes
0
Auto
Matrix
None
2 Min
2 Seconds
On
1 Sec
Multi-Area
Off
Auto
NTSC for USA/Japan, PAL for Europe/Asia
USA/Japan: MM/DD/YYYY, 12-hour
Europe/Asia: DD/MM/YYYY, 24-hour
44
Advertisement
Table of Contents
