RECORDING A VIDEO CLIP WITH THE SELF-TIMER
A
AWB
1. In the (
) Video Clip Mode, press
2. Place the camera on a flat surface or mount it on a tripod.
3. Use the LCD to compose the picture, then press the Shutter button to activate the Self-Timer.
The Self -Timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds then starts recording.
4. Press the Shutter button again to stop recording. Otherwise, the camera will continue to record until the
memory limit is reached.
A
USING THE MAIN MENU IN VIDEO CLIP MODE
AWB
VIDEO MODE
WHITE BALANCE
PICTURE EFFECTS
+
EV COMPENSATION
–
METERING
VIDEO RESOLUTION
RETURN
SELECT
How to Use the Main Menu in Video Clip Mode:
1. Turn the camera on.
2. Set the mode switch to (
3. Press the MENU button to display the main menu.
4. Press
or
until the desired option is highlighted.
5. Press
to enter the submenu.
6. Press
or
in the submenu to toggle between the options.
7. Press the OK button to make a selection.
• All selections will be marked by a red check mark.
8. To return to the previous menu, press
9. To exit the menu at any time, press the MENU button.
1 SEC
28 SEC
button, and the Self-Timer icon (
X1
WHITE BALANCE
AWB
AWB
SUNNY
FLUORESCENT
TUNGSTEN
A
RETURN
AWB
A
AWB
) Video Clip mode.
.
26
28 SEC
Press Shutter to Record
) will appear on the LCD.
X2
A
OK
SET
AWB
A
AWB
TAKING VIDEO CLIPS
A
AWB
PICTURE EFFECT
OFF
B&W
SEPIA
A
RETURN
SET
OK
+
EV COMPENSATION
–
AWB
00 EV
–
+
SET
OK
METERING
SPOT
MATRIX
RETURN
OK
SET
VIDEO RESOLUTION
320x240
160x120
RETURN
SET
OK
A
AWB
Need help?
Do you have a question about the Eye-Q 3345z and is the answer not in the manual?
Questions and answers