Concord Camera Eye-Q 2133Z Quick Manual

Concord Eye-Q 2133z

Quick Guide

1

Identifying components

Built-in Flash
Front View
Shutter Button
2

Inserting the Batteries

1
1
2
2
3
Inserting the SD/MMC Card
This manual is designed to be a quick and easy guide to setting up your camera to take photographs,
installing the included software, and connecting to your computer. Refer to this guide for quick setup
instructions. Refer to the User Manual for more detailed information.
4
Self-Timer LED
Light Sensor
Viewfinder
Lens
Microphone
Open the battery / memory card
compartment by pressing on the
cover and sliding in the direction
of the arrow toward the outside
edge of the camera.
Open the compartment cover.
Insert the memory
card with the notched
corner facing the
camera (gold circuitry
facing toward the
Notch
back of the camera).
Power Button
Viewfinder
Rear View
Status LED
LCD Display
Up Button
If a SD/MMC card is inserted, the LCD display shows the number of shots remaining on
the card. If a SD/MMC card is not inserted, the LCD display will show the number of shots
remaining on the camera's internal memory.
If you do not insert the SD/MMC card, the camera can still take a limited
-
number of pictures and store them on its internal memory.
Strobe / Copy
WB/Delete
Zoom Out
Zoom In
Shutter Button
Down Button
Mode Dial
Display Button
3
Insert batteries into the chamber making sure
that the positive and negative ends are
properly oriented with the polarity indicated on
the inside of the compartment.
4
Close the battery cover.
Use only size AA alkaline batteries.
-
Power Jack
Video Out Jack
USB Port
Hand Strap Loop
1