Advertisement
Quick Links
Advertisement
Related Manuals for Betafence Nylofor City
Summary of Contents for Betafence Nylofor City
- Page 1 Nylofor City ® Installation manual...
-
Page 2: Table Of Contents
0. Content Components of the fencing system The posts The panels The clamps Installation of Nylofor City Foundations Install posts Install panels 2 10/02/2015 – Nylofor City Installation Manual ®... - Page 3 1. Components of the fencing system 1. The posts 2. The panels 3. The clamps Installation of Nylofor City Foundations Install posts Install panels 3 10/02/2015 – Nylofor City Installation Manual ®...
-
Page 4: Components Of The Fencing System
1. Components of the fencing system 1.1 The posts The section of the post is always 60x60x1,5mm CONCRETE Types: intermediate posts (same as end posts) and corner posts The posts are foreseen of the appropriate holes and inserts ... -
Page 5: The Panels
1. Components of the fencing system 1.2 The panels Nylofor City is always installed with Nylofor F panels. Panels with overhangs are mounted with the pins on the bottom A top rail is mounted on top of the panel to have additional rigidity, ... - Page 6 1. Components of the fencing system 1.2 The panels Standard range of panels and posts: Height of the fence Panel dimensions Length of the posts Length of the # inserts WxH (mm) in concrete (mm) posts on floorplate (mm) (mm) 2500x606 1000...
-
Page 7: The Clamps
1. Components of the fencing system 1.3 The clamps Nylofor City is installed with one metal clamp on top to hold the rail, the other clamps are standard Nylofor F clamps (PA) — There are 3 types of metal clamps: an intermediate clamp, a left corner clamp and a right corner clamp. - Page 8 Components of the fencing system The posts The panels The clamps 2. Installation of Nylofor City 1. Foundations 2. Install posts 3. Install panels 8 10/02/2015 – Nylofor City Installation Manual ®...
-
Page 9: Installation Of Nylofor City
2. Installation of Nylofor City 2.1 Foundations To obtain the best result, it is recommended to level the ground over the whole length of the fence Align the fence line For correct positioning, maintain the centre-centre distance of 2530mm ... -
Page 10: Install Posts
2. Installation of Nylofor City 2.2 Install posts Installation principle: when installing Nylofor City, first all the posts can be placed and then the panels can be attached ALIGNING THE POSTS Place a pin before the first post of the fence and ... - Page 11 2. Installation of Nylofor City 2.2 Install posts PLACEMENT OF THE POSTS (USE A TEMPLATE) A template makes it much easier to place the posts correctly The template must be made by the installer and must have 2 recesses into which the posts fit...
-
Page 12: Install Panels
2. Installation of Nylofor City 2.3 Install panels ASSEMBLING THE PANEL Glue the neoprene strips on the top of the horizontal wire of the panel. Divide 3 strips over the complete width of the panel Slide the panel into the top rail ... - Page 13 2. Installation of Nylofor City 2.3 Install panels INSTALLING THE PANELS Fasten the top of the panels with a metal clamp Fasten the other positions of the panels with the PA clamps Repeat these steps to complete the installation ...
- Page 14 2. Installation of Nylofor City 2.3 Install panels INSTALLATION ON FLOORPLATE The bottom clamp is fixed on the floorplate. 14 10/02/2015 – Nylofor City Installation Manual ®...
- Page 15 2. Installation of Nylofor City 2.3 Install panels INSTALLING THE END POST In case of an end post, use a corner clamp to fix the top of the panel 15 10/02/2015 – Nylofor City Installation Manual ®...
- Page 16 2. Installation of Nylofor City 2.3 Install panels INSTALLING CORNERS / SLOPES In case of a corner, use a corner post with inserts on two adjacent sides. Fasten the top of the panel with left and right corner clamps Only corners of 90°...
Need help?
Do you have a question about the Nylofor City and is the answer not in the manual?
Questions and answers