Yamaha TW125 2003 Supplementary Service Manual page 17

P Clamp the brake hose and
speedometer cable. Align the
clamping position with the center
of white paint mark on the brake
hose.
Q Clamp the brake hose and
speedometer cable with a hold-
er.
R Point the speedometer cable
cap to the backward.
S Make sure to push in the boot ful-
ly.
CABLE ROUTING
T Place the speedometer cable in
the inner side.
U After tightening screws, insert
the hose in the screw section.
V Distortion should be within this
range toward the traveling direc-
tion of vehicle.
W Place the brake hose in the outer
side.
X Cut the surplus part of the clamp
for the left handle bar switch lead
and the meter lead.
–9–
SPEC