Yamaha TW125 2003 Supplementary Service Manual page 14

K Push the wire harness in be-
tween frame and box.
L Place the C.D.I. unit on the at-
taching section of the left side
relay.
M Route the carburetor heater lead
in the inner side of the turn signal
relay.
N Clamp the wire harness and
diode. Point the surplus part to
the downward.
CABLE ROUTING
O Point the surplus part of the
clamp for the wire harness and
the diode to the inner side.
Place the diode section between
the pipes of the frame.
–6–
SPEC