Table of Contents
Advertisement
REMOTE LOCATION CONTROLS
Notes:
1. Remove spacer tab before using this unit for first time.
2. Press the buttons of the remote to pointing the main unit remote senor area to fully control
the main unit.
TO INSTALLING / REPLACING REMOTE BATTERY
1. Pull the battery door at the back of the unit as shown figure.
2. Insert the battery in the battery door with "+" positive facing up. Only
CR2025 3V lithium battery should be used.
3. Insert the battery door with new battery back into the unit.
Battery warning:
1. Make sure the correct polarity of battery to be installed.
2. Make sure you dispose of batteries properly (refer to your local
regulations).
3. Do not open batteries.
4. Do not dispose of batteries in fire.
5. Do not heat up batteries.
6. Do not expose batteries to water.
7. Do not charge or recharge batteries.
6
Advertisement
Table of Contents
