IBM Power 775 Manual page 7

CAUTION: Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which
might result in splattered metal, burns, or both. (L005)
CAUTION: Hazardous moving parts nearby. (L008)
CAUTION:
System or part is heavy. The label is accompanied by a specific weight range. (L009)
CAUTION:
Protective eyewear is needed for the procedure. (L011)
CAUTION:
Pinch hazard. (L012)
ATTENTION: Small gaps exist that could pinch body parts if care is not exercised.
CAUTION:
Chemical resistant gloves are needed for this procedure. (L014)
DANGER:
Risk of electric shock due to water or a water solution which is present in this product.
Avoid working on or near energized equipment with wet hands or when spilled water is present.
(L016)
DANGER:
Risk of injury due to heavy components falling from rack if the supplemental
supports are not installed. (L019)
ATTENTION: The supplemental supports (Cam Followers) must be installed for the CEC or DE slide out service.
Power775 CEC Drawer Rails Service Procedure
PN: 41U8495, EC N44172
Page 7 of 42