Operation Mode Selection: Cooling, Heating Or Automatic - Hayward SUPREME HP60TR Installation Instructions Manual

4. USAGE AND OPERATION
Timer 2 settings
After the Timer 1 settings, you will access directly the settings for Timer 2:
and
Proceed in the same manner as for Timer 1.
Nota: To access directly Timer ON2
twice on
Timers suppression
1) Press for 2s, Timer ON1
2) Press
3) Press to suppress the Timer
4) Press to validate.
5) Press
Press once
6) Press
7) Press to suppress the Timer
(*) To access Timers 2
twice . Proceed in the same manner as above.

4.4 Operation mode selection: cooling, heating or automatic

In Mode "OFF" or "ON"
Press the button
If the heat pump is set in heating only or cooling only, changing mode
is not possible.
12
.
.
(Start and
to make the time display flash.
for 2s, the Timer
, the Timer
to make the time display flash.
or
to change mode: cooling, heating or automatic.
, press
Stop)
flashes.(*)
.
flashes.
flashes.(*)
.
, follow steps 1) or 4) then press
for 2s, then press