Westfalia 812217 Instruction Manual page 14

Safety Notes
Do not use the unit in damp or wet environments or in the vicinity of combusti-
ble fluids or gases.
Do not overload the cable winch. Only use the cable winch up to its maximum
load capacity. Refer to the technical data sheet. Any load details found on the
lifting hook, names the maximum load capacity of the lifting hook and not the
load capacity of the cable winch!
The unit is not designed for continuous, professional use.
Protect the power cord from heat, oil and sharp edges. Protect the steel cable
from sharp edges. Immediately replace a damaged steel cable.
For using the unit, we recommend using a residual current device (RCD). In
Switzerland the utilisation of an RCD is obligatory.
Modifications on the cable winch are not allowed.
Only use original accessory.
Do not lift persons with the cable winch and do not divert the unit from its
intended use.
Do not use the cable winch as a plaything (e.g. as a swing).
If the unit becomes damaged, do not use it and have it repaired by a profes-
sional or contact our customer service. Do not disassemble the unit or try
repairing it yourself.
9