Brewing Ground Coffee; Brewing Pods - Ninja DualBrew PRO CFP300 Series Owner's Manual

USING THE NINJA® DUALBREW PRO COFFEE
SYSTEM – CONT.
BREWING
GROUND COFFEE
USING THE BREW BASKET AND
SLIDING LID
1 To prepare for brewing, open the
sliding lid by sliding it back under
the hood and ensure the brew basket
is installed.
2 Place a #4 paper cone filter or
permanent filter (not included on
all models, sold separately) in the
brew basket.
NOTE: Fold the paper filter along the
seams, open the top fully, and firmly
press it into the brew basket, making
sure it is fully seated.
12
1-877-646-5288
3 Use the Ninja Smart Scoop™ and follow
the measurements on the scoop or on
the Coffee Measurement Chart to fill
the filter.
4 Return the sliding lid to its closed
position by sliding it forwards over
the brew basket until it clicks
into place.

BREWING PODS

USING THE NINJA POD ADAPTER
1 To prepare for brewing, open the sliding
lid by sliding it back under the hood, and
ensure the brew basket is installed.
NOTE: The Ninja Pod Adapter comes
already installed in the brewer.
2 Ensure the adapter is in the REMOVE
position before installing. Then place
the adapter over the brew basket and
push down firmly so it is fully seated.
NOTE: Make sure the brew basket is
clean and free of any filters before
inserting the Ninja® Pod Adapter.
3 Slide the Ninja Pod Adapter handle into
the LOCK position.
REMOVE
LOCK
4 Lift the the Ninja Pod Adapter handle
to reveal the pod holder. Place a new
pod in the holder.
5 Press the handle down firmly to
pierce the pod, and ensure that it is
completely closed. There will be an
audible click and some resistance
when closing the handle as the needles
puncture the pod.
NOTE: DO NOT remove the top of the
K-Cup Pod.
HIGH-ALTITUDE BREWING: Before
closing the Ninja Pod Adapter handle
to start a brew, Using your fingers,
carefully apply pressure on the K-Cup
Pod until the bottom of the K-Cup
Pod is punctured by the exit needle,
and the pod is fully seated in the pod
holder. This releases excessive gas built
up from the high altitude and prevents
pod blowout.
NOTE: Reusable K-Cup Coffee Filters
are not compatible with the Ninja Pod
Adapter. If using ground coffee, use
the grounds mode with a paper or
permanent filter (sold separately) to
brew a single-serve size.
ninjakitchen.com
13