Priming Your Ninja® Dualbrew Pro Coffee System - Ninja DualBrew PRO CFP300 Series Owner's Manual

PRIMING YOUR
NINJA® DUALBREW PRO COFFEE SYSTEM
1 Clean all accessories before your
first brew.
2 Plug the brewer in and turn it on by
pressing the power button.
3 Lift the water reservoir off of its
base. Remove the reservoir lid. Add
water up to, but not exceeding the
Full line. Return the water reservoir
to the brewer. DO NOT fill the water
reservoir with anything other than
water, as other liquids may damage
your brewer.
We recommend using cool
NOTE:
or room temperature water in the
reservoir. DO NOT fill with hot or
boiling water.
4 Remove the Ninja Pod Adapter by
pushing the handle away from you
so that the position indicator is in the
REMOVE position. Then, using the
handles on the left and right, lift the
adapter out of the brewer.
REMOVE
LOCK
8
1-877-646-5288
5 After the adapter is removed, slide the
sliding lid all the way forward over the
brew basket until it is completely closed
and clicks into place.
DO NOT place ground coffee
NOTE:
directly in the brew basket without
a filter.
6 Center the carafe with the brew-through
lid installed below the brew basket.
With everything securely in place and
the brewer powered on, turn the dial to
select the Full Carafe size and press the
BREW STYLE button to select Classic.
7 To start, press the START BREW
button. When the cycle is complete,
discard the water and rinse the carafe.
You are now ready to use your Ninja
DualBrew Pro Coffee System.
CONFIGURING THE WATER RESERVOIR
The water reservoir can be positioned to
the right or along the back of the brewer to
optimize counter space.
To configure the water reservoir:
1 Remove the reservoir from the base.
2 Remove the water reservoir latch.
BACK OF
BREWER
3 Swing the reservoir base around the
brewer until it clicks into place.
You may feel some resistance.
Make sure the power cord is
NOTE:
not in the way of the reservoir base.
4 Rotate the water reservoir latch
180 degrees and re-insert it in the
new gap where the base was
previously positioned.
SIDE OF
BREWER
5 Place the water reservoir back on
the base.
ninjakitchen.com
9