Table of Contents
Advertisement
USING THE NINJA® DUALBREW PRO COFFEE
SYSTEM – CONT.
INTELLIGENT WARMING PLATE
The Intelligent Warming Plate will
automatically turn on during Classic or Rich
brews when a
/
,
/
,
/
, or full carafe size is
1
1
3
4
2
4
selected. The Intelligent Warming Plate is set
to a specific temperature setpoint to avoid
burning the coffee over time. To turn the
warming plate on at any time, turn the dial to
one of the carafe sizes, select Classic or Rich,
and press the KEEP WARM button.
IMPORTANT: The
light on the base
of the brewer will illuminate only
when the warming plate is hot and
will remain illuminated until the plate
has cooled down.
TIME ADJUSTMENT
You can adjust how long the Intelligent
Warming Plate remains on (up to 4 hours).
By default, the Intelligent Warming Plate is
set to remain on for 2 hours. To change the
time setting of your warming plate, follow
these instructions:
1 Press and hold KEEP WARM until the
clock begins to flash the current warming
time.
16
1-877-646-5288
2 Turn the dial to increase the time in
15 minute increments up to 4 hours or
decrease the time to 0 hours. Press
START BREW on the dial to set the
new time.
NOTE: If you set the warming time to
0 hours, Keep Warm will not
automatically activate during or after
a carafe brew cycle, but you can still
turn it on manually by pressing the
KEEP WARM button.
NOTE: The time adjustment setting will
be saved and will not reset when the
brewer is unplugged or loses power.
NOTE: Thermal carafe (CFP305)
does not include a warming plate
because of the thermal carafe's
vacuum insulation.
SETTING THE DELAY BREW
1 Plug the brewer in and turn it on by
pressing the Power button.
NOTE: The clock will remain on even
if the brewer is turned off. Ensure the
brewer is powered on to set Delay Brew.
2 After filling the water reservoir and
adding ground coffee to the filter or
inserting a pod in the Ninja Pod Adapter,
close the sliding lid or adapter handle,
and place the appropriate-size vessel
under the brew basket.
3 Press DELAY. DELAY will illuminate and
the clock will begin to flash "12:00" or the
last time that was set.
4 While the clock is flashing, turn the
Multi-Serve dial to adjust the hour. The
AM or PM indicator will illuminate under
the clock display as you are setting the
desired time. Press START BREW on
the dial and turn the Multi-Serve dial to
adjust the minute. Press START BREW
on the dial to lock in your time.
5 Once the desired time has been set,
select the size of the vessel that you
would like to brew using the Multi-
Serve dial.
6 Press the BREW STLYE button to
choose your brew style. If in hot water
mode, press WATER TEMP to choose
your water temperature.
7 Once the time, brew size, and brew
style have been set, press the START
BREW button to activate. When
activated, the brewer will beep and
DELAY and your selected options will
remain illuminated. To cancel, press
DELAY again.
NOTE: The brewer must remain on for
the Delay Brew function to work.
DO NOT power off or unplug after
setting Delay Brew. If the brewer is
turned off or unplugged, delay brew
will need to be reset.
USING THE DRIP STOP
The drip stop is used to close off the
brew basket to prevent any coffee from
dispensing. You will need to manually open
and close the drip stop by moving the lever
to your desired position. It can be closed
and reopened at any point before, during,
or after a brew.
If you forget to open the Drip Stop, the
brewer will pause the brew, and after
30 seconds it will give you a friendly
audible reminder. After 5 minutes, the
brew will be canceled.
NOTE: If the Drip Stop is closed before
you begin a brew, the brewer
will notify you with 3 beeps and the
Drip Stop indicator will illuminate.
Move the Drip Stop to the open
position and press the START BREW
button to begin your brew.
CLOSED
OPEN
CLOSING THE DRIP STOP AFTER A BREW
When the brew cycle is complete, set the
Drip Stop to the closed position to stop
dripping from the brew basket and Ninja
Pod Adapter. While the Drip Stop is closed,
the Drip Stop indicator will illuminate.
NOTE: Remember to open the Drip Stop
when you are ready to brew again. If you
forget, your brewer will give you a
friendly audible reminder.
ninjakitchen.com
ninjakitchen.com
17
17
Hide quick links:
Advertisement
Table of Contents
