Coffee Measurement Chart; Brewing Ground Coffee; Brewing Pods - Ninja DUALBREW CFP200 Series Owner's Manual

USING THE NINJA® DUALBREW COFFEE MAKER
CONT.
MEASURING YOUR COFFEE GROUNDS
For best results, use the measurements on
the Ninja Smart Scoop™ or in the chart to
determine how much ground coffee to use
for each brew size. The amount of ground
coffee for each size will remain the same
for any brew type you select. For example,
if you select Cup and Classic, you will use
the same amount of coffee grounds as if
you were to select Cup and Over Ice.
NOTE: Adjust to your preferred taste.
More scoops result in stronger coffee
but slightly lower volumes, fewer
scoops result in weaker coffee and
slightly higher volumes. Use fewer
scoops of decaffeinated coffee to
prevent overflow. Use a medium-sized
grind if grinding whole beans. Grinding
beans too finely may cause the brew
basket to overflow.
10
1-877-646-5288

COFFEE MEASUREMENT CHART

Ninja Smart
Serving Size Tablespoons
Scoop
Sm Cup
2–3 2–3
Cup
small scoops tablespoons
Xl Cup
Travel
3–5 3–5
small scoops tablespoons
Xl Travel
1 / Carafe
4
3–5 6–10
big scoops tablespoons
1 / Carafe
2
3 / Carafe
4
4–7 8–14
big scoops tablespoons
Full
Carafe
BREWING
GROUND COFFEE
USING THE BREW BASKET AND
SLIDING LID
1 To prepare for brewing, open the
sliding lid by sliding it back under
the hood and ensure the brew basket
is installed.
2 Place a #4 paper cone filter or
permanent filter (not included on
all models, sold separately) in the
brew basket.
NOTE: Fold the paper filter along the
seams, open the top fully, and firmly
press it into the brew basket, making
sure it is fully seated.
DO NOT place ground coffee
NOTE:
directly in the brew basket without
a filter.
3 Use the Ninja Smart Scoop™ and follow
the measurements on the scoop or on
the Coffee Measurement Chart to fill
the filter.
4 Return the sliding lid to its closed
position by sliding it forwards over
the brew basket until it clicks
into place.

BREWING PODS

USING THE NINJA POD ADAPTER
1 To prepare for brewing, open the sliding
lid by sliding it back under the hood, and
ensure the brew basket is installed.
NOTE: The Ninja Pod Adapter comes
already installed in the brewer.
ninjakitchen.com
11