Advertisement
HERE'S WHAT'S IN THE BOX
GROUND COFFEE
BREW BASKET
Comes fully installed
in the brewer. It must
always be inserted when
brewing grounds.
PAPER FILTER KIT
60 OZ.
GLASS CARAFE
60 OZ. REMOVABLE
WATER RESERVOIR
2
For how-to videos and more, visit ninjakitchen.com
CAPSULES
FROTHER WHISK
Included in the box. Must be
assembled on the brewer.
NINJA
SMART SCOOP™
Use this to measure
coffee grounds.
CAPSULE BIN
CUP TRAY BASE
ADJUSTABLE
CUP TRAY
SCAN HERE
TO ACCESS OWNER'S GUIDE,
HOW-TO VIDEOS, AND MORE
BEFORE YOUR FIRST BREW
1 Clean all accessories before your first brew.
2 Plug the brewer in and turn it on by pressing the power button.
3 Lift the water reservoir off its base and remove the reservoir lid. Add water up to, but not
exceeding, the Full line. Return the water reservoir to the brewer. DO NOT fill the water
reservoir with anything other than water, as other liquids may damage your brewer.
NOTE: We recommend using cool or room-temperature water in the reservoir.
DO NOT fill with hot or boiling water.
PRIMING GROUNDS
1 Ensure the brew basket is fully
installed in the unit and close the lid.
Do not add coffee.
2 Place the carafe below the brew
basket. Press the Grounds Button to
select Classic, then turn the dial to
select the Full Carafe size.
3 To start, press START BREW. When
the cycle is complete, discard the
water and rinse the carafe. You are
now ready to brew grounds.
OR
PRIMING CAPSULES
1 Ensure the lever is closed.
Do not insert a capsule.
2 Center a vessel under the spout.
Press the Capsule Button or turn
the dial to select Lungo.
3 To start, press START BREW.
When the cycle is complete,
discard the water in the vessel,
then rinse. Repeat this process
3 times. You are now ready to
brew capsules.
Questions? 1-877-646-5288
3
Advertisement
