Coffee Measurement Chart; Brewing Ground Coffee; Brewing Pods - Ninja DUALBREW GROUNDS & PODS CFP400 Series Owner's Manual

USING THE NINJA® DUALBREW SPECIALTY
COFFEE SYSTEM CONT.
MEASURING YOUR COFFEE GROUNDS
For best results, use the measurements
on the Ninja Smart Scoop™ or in the chart
to determine how much ground coffee to
use for each brew size. Always use level
scoops when measuring ground coffee.
The amount of ground coffee for each size
will remain the same for any brew type
you select. For example, if you select Cup
and Classic, you will use the same amount
of coffee grounds as if you were to select
Cup and Over Ice.
NOTE: Adjust to your preferred taste.
More scoops result in stronger coffee
but slightly lower volumes, fewer
scoops result in weaker coffee and
slightly higher volumes. Decaf and finer
grind coffees drain slower and may
cause coffee to overflow the filter. If
overflow occurs, reduce the number of
scoops of coffee grounds used. With
some brands of coffee, the amount of
grounds may need to be reduced to
as few as 5 large scoops to prevent
overflow.
10
1-877-646-5288

COFFEE MEASUREMENT CHART

Ninja Smart
Serving Size Tablespoons
Scoop
Sm Cup
2–3 2–3
Cup
small scoops tablespoons
Xl Cup
Travel
3–5 3–5
small scoops tablespoons
Xl Travel
1 / Carafe
4
3–5 6–10
big scoops tablespoons
1 / Carafe
2
3 / Carafe
4
4–7 8–14
big scoops tablespoons
Full
Carafe
BREWING
GROUND COFFEE
USING THE BREW BASKET AND
SLIDING LID
1 To prepare for brewing, open the
sliding lid by sliding it back under
the hood and ensure the brew basket
is installed.
2 Place the permanent filter or a #4 paper
cone filter in the brew basket.
NOTE: Fold the paper filter along the
seams, open the top fully, and firmly
press it into the brew basket, making
sure it is fully seated.
DO NOT place ground coffee
NOTE:
directly in the brew basket without
a filter.
3 Use the Ninja Smart Scoop™ and follow
the measurements on the scoop or on
the Coffee Measurement Chart to fill
the filter.
4 Return the sliding lid to its closed
position by sliding it forwards over
the brew basket until it clicks
into place.

BREWING PODS

USING THE NINJA POD ADAPTER
1 To prepare for brewing, open the sliding
lid by sliding it back under the hood, and
ensure the brew basket is installed.
NOTE: The Ninja Pod Adapter comes
already installed in the brewer.
ninjakitchen.com
11