Download Print this page

Datacolor SpyderTV Quick Start Manual

Colorimeter

Advertisement

Quick Links

TV
Q U I C K S T A R T G U I D E
1
SpyderTV colorimeter
1
SpyderTV software CD
1
SpyderTV Test Pattern and Instructions DVD
1
Suction cup/tripod attachment
1
Storage bag
1
Quick Start Guide
1
Warranty card
SpyderTV System Requirements
DVD player
Remote control
Desktop or laptop PC nearby the TV
with Windows® 2000 or XP operating
system and a USB port.
1
BEFORE YOU START
S T E P
Ensure that all necessary hardware is available
(desktop or laptop PC nearby, DVD player, remote
control for your DVD and for your display)
Insert your Test Pattern and Instructions DVD and select
the
How to Use SpyderTV
menu item to learn how to
optimize your TV.
2
INSTALL YOUR SOFTWARE
S T E P
Install your SpyderTV software following
on-screen instructions
www.spydertv.com
©2005 Datacolor. All rights reserved. Datacolor and other Datacolor trademarks are the property of Datacolor.
Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
3
PLACE THE SpyderTV COLORIMETER
S T E P
ON YOUR SCREEN
There are 2 ways to place the SpyderTV
colorimeter on your screen:
a. Suction cup
b. Tripod
3a
USING SUCTION CUP TO PLACE THE
S T E P
SpyderTV COLORIMETER ON YOUR SCREEN
Slide the suction cup down the wire
so that it is on the SpyderTV leg.
Attach the suction cup to the TV so that the
SpyderTV is in the center of the screen.
WARNING: Do not press the suction cup
down too hard. Be sure to use the release tab
when removing the suction cup.
3b
.
USING A TRIPOD TO PLACE THE SpyderTV
S T E P
COLORIMETER ON YOUR SCREEN
Tripod not included.
Snap the suction cup onto the SpyderTV.
Then, screw the device to the tripod mount.
Attach to any standard tripod.
Place the tripod with the SpyderTV against the TV.
Tilt and adjust the tripod so your SpyderTV touches
the TV in the middle and is perfectly flush.
4
SET UP TO OPTIMIZE YOUR DISPLAY
S T E P
Insert the USB connection of the SpyderTV colorimeter
into the USB port on your computer.
Clicking on your SpyderTV icon on your
desktop, launch the SpyderTV software.
5
OPTIMIZE YOUR DISPLAY
S T E P
Follow the steps of the software wizard to complete your
optimization using the "help" files screens for a more
in-depth explanation of each step.
6
CHECK BEFORE AND AFTER IMAGES
S T E P
From the Main Menu of the DVD, select
Images
to see the improvement in your picture.
CONGRATULATIONS, YOU'RE DONE!
For customer support, call 800-554-8688.
Before & After

Advertisement

loading