pro.point 1/4 IN. MINI Instructions Manual page 7

V1.0
3.4 Do not wrap the air hose around the tool as sharp edges may pierce
or crack the air hose. Gently coil the hose and either hang on a
hook or fasten with a device to keep hose together when storing.
4. A damaged or disconnected air hose under pressure may whip
around and inflict personal injury or damage the work area. Secure
the compressor's air hose to a fixed or permanent structure with
clamps or cable ties.
COMPRESSOR/TANK PRECAUTIONS
DANGER! Do not use an air tank beyond its expiration date. A tank
rupture or explosion may kill or cause a serious injury to yourself
or a bystander. Disable and discard the air tank according to the
your municipality by-laws.
1. Never drill into, weld, patch or modify the air tank. Immediately
replace the tank or compressor if an air leak develops. The leak
may lead to a rupture.
2. Never make adjustments to the components that control tank
pressure. Serious injury or death may occur if modifications are
made to the pressure switch, safety relief valve or other
components that control the tank pressure.
3. Check operation of the pressure relief valve on a regular basis and
never operate without a factory approved pressure relief valve. Do
not make alterations to the factory operating pressure settings.
POWER TOOL PRECAUTIONS
Tool accessory is a general term that refers to drill bit, saw or cutting
blades, grinding wheel, etc. as appropriate for the tool.
1. Do not use any power tool with a malfunctioning power switch or
control. A power tool that fails to respond to the controls is dangerous
and can cause an injury. A qualified technician must repair and verify
the power tool is operating correctly, before it can be used.
2. Do not cover the air vents.
3. Disconnect the power source before installing or servicing the tool.
4. Never force the tool. Excessive pressure could break the tool,
resulting in damage to your workpiece or serious personal injury.
Excessive pressure is the cause if your tool runs smoothly under no
load, but roughly under load.
Visit www.princessauto.com for more information
1/4 and 1/8 in. Mini Air Die Grinder 8844169
7