Specific Safety Precautions - pro.point 1/4 IN. MINI Instructions Manual

V1.0

SPECIFIC SAFETY PRECAUTIONS

WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for an
unintended purpose.
2. Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3. This tool will not stop moving immediately. Do not lay the tool down
or leave it unattended until it has come to a complete stop. A part
that is moving could make the tool jump or grab a surface and pull
the tool out of your control.
4. Always make sure the work surface is free from nails and other
foreign objects.
5. After changing the accessories or making adjustments, make sure
the collet nut and any other adjustment devices are securely
tightened. Loose adjustment devices will be violently thrown.
6. Always check accessories for damage before each use. Damaged
accessories can break during use and cause serious injury.
7. If you are interrupted when operating the die grinder, complete the
process and switch off the tool before looking up.
8. Use metal and voltage detectors to locate hidden electric, water or
gas lines. Avoid touching live components or conductors.
9. Only use die grinder attachments with this tool. Do not use drill bits.
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
2. Install an in-line shutoff valve or regulator to allow immediate control
over the air supply in an emergency, even if a hose is ruptured.
3. Discontinue tool use if it does not work properly or air is leaking.
Tag or mark the tool as 'defective' or 'out of service' until repaired.
4. Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated to
Visit www.princessauto.com for more information
1/4 and 1/8 in. Mini Air Die Grinder 8844169
5