Table of Contents
Advertisement
Available languages
Available languages
8844169
6.
Wait until the grinding die has reach full speed before applying it to
the material
7.
Test the tool under no load to confirm the grinding die is installed
correctly.
8.
Apply the grinding die against the material so the debris is moved
away from the work area. Do not press down too hard, as this can
cause the die to slow or gouge the workpiece.
9.
Lift the die grinder from the material and slowly release the trigger
lever. The trigger lever safety will automatically snap back into place.
10. Wait for the grinding die to stop before placing the tool down.
11. Shut the compressor off once the task is completed. Squeeze the
trigger to release residual compressed air from the hose and tool.
Disconnect the tool.
DIES AND ATTACHMENTS
Die grinder dies and attachments are designed to cut, polish and shape
surfaces. Some attachments can be used on any material while others are
designed specifically for wood, plastic or metal. Consult the manufacturer
information to determine the correct use of the die or attachment.
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced
by an authorized technician. Only use identical replacement parts
when servicing.
3.
Verify the die grinder's speed with a tachometer to ensure it does
not exceed the maximum speed. Have the tool repaired if the max.
speed is higher than the no load speed in Specifications.
4.
Follow instructions for lubricating and changing accessories.
5.
Only use accessories intended for use with this tool.
6.
Keep the tool handles clean, dry and free from oil/grease at all times.
7.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
12
1/4 and 1/8 in. Mini Air Die Grinder
For technical questions call 1-800-665-8685
V1.0
Advertisement
Table of Contents
