Assemble the WARMING RACK and SUPPORT WIRE into the middle burner lid.
Note: Steps 20-A and 20-B are pre-assembled at the factory. Proceed to Step 20-C.
Step
20
20-A
Support Wire
20-A. Insert the SUPPORT WIRE into the left end of the WARMING RACK.
20-B
20-B. Thread the SUPPORT WIRE through the right end of the WARMING RACK.
Warming Rack
20-C
Left Hole in Lid
20-C. Insert the WARMING RACK through the Left Hole in the lid (far
enough to clear the Right Hole), then slide the WARMING RACK
into the Right Hole of the lid.
Center the Warming Rack in the lid.
20-D
Right Pivot
Left Pivot
20-D. Insert the SUPPORT WIRE into the Left Pivot.
Squeeze the SUPPORT WIRE to fit into the Right Pivot.
(Pg. 22)