NOTE: The grill is upside-down during this assembly step.
Assemble casters.
Level and tighten the casters.
Step
11
11-A
Base
11-A. Assemble locking casters to front of base.
Assemble non-locking casters to back of base.
Make sure hex bottoms out on base.
Non-Locking Caster
Locking Caster
Front
11-B
11-B. Fasten wheels tight against the Base Casting.
Use an 11/16" open end wrench to tighten the Hex Collar against
the Base Casting.
Hex Collar
(Pg. 13)