Table of Contents
Advertisement
DISABLING PRE-COLLISION SYSTEM (PCS)
To disable the system
Press the PCS switch for 3 seconds or more.
The
will turn on and a message will be displayed on the
Multi-Information Display (MID).
To enable the system
Press the PCS switch again. The system is enabled.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
Refer to a Toyota Owner's Manual for additional information on PCS w/PD
operation, settings adjustments, limitations, and precautions before attempting to
use it.
Lane Departure Alert (LDA)
LDA in TSS-C uses an in-vehicle camera designed to detect visible white and yellow
lane markers in front of the vehicle and the vehicle's position on the road. If the system
determines that the vehicle is starting to unintentionally deviate from its lane, the system
alerts the driver with an audio and visual alert. When the alerts occur, the driver must
check the surrounding road situation and carefully operate the steering wheel to move
the vehicle back to the center part of their lane.
LDA is designed to function at speeds of approximately 32 MPH or higher on relatively
straight roadways.
27
Advertisement
Table of Contents
