Table of Contents
Advertisement
TOYOTA SAFETY SENSE
PEDESTRIAN DETECTION FUNCTION
In certain conditions, the PCS system included with the TSS-C package may also
help to detect a pedestrian in front of your vehicle. With Toyota Safety Sense™ C,
PCS uses an in-vehicle camera and lasers to help detect a pedestrian in front of your
vehicle in certain conditions. The system of PCS detects a potential pedestrian based
on size, profile, and motion of the detected pedestrian. However, a pedestrian may
not be detected depending on the conditions, including the surrounding brightness
and the motion, posture and angle of the potential detected pedestrian, preventing the
system from operating or engaging. Refer to a Toyota Owner's Manual for additional
information.
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
CHANGING PCS ALERT TIMING
Each time the PCS switch is pressed, the response to the PCS alert timing changes.
Note: PCS is enabled each time the engine switch is turned to Ignition On.
The system can be disabled/enabled and the alert timing of the system can be
changed. (Alert timing only, brake operation remains the same).
™
Monocular camera sensor
26
Lasers
Far
Middle
(default)
Near
Advertisement
Table of Contents
