Safety & Emergency Features; Seat Belts; Tire Pressure Monitoring (Warning) System (Tpms) - Toyota PRIUS C 2019 Quick Reference Manual

Hide thumbs Also See for PRIUS C 2019:
Table of Contents

Advertisement

SAFETY & EMERGENCY FEATURES

Seat belts

NOTE: If a passenger's seat belt is fully extended, then retracted even slightly,
the Automatic Locking Retractor (ALR) will prevent it from being re-extended
beyond that point, unless fully retracted again. This feature is used to help
hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint system,
refer to the Owner's Manual.

Tire Pressure Monitoring (warning) System (TPMS)

After adjusting tire pressures, or after tires have been rotated or replaced, turn
the "POWER"/ignition switch "ON" and press and hold the "
indicator blinks three times. Let the vehicle sit for a few minutes to allow initialization
to complete.
Refer to the load label on the door jamb or the Owner's Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
Keep as low on
hips as possible
System reset initialization
1. Push and hold "
indicator blinks three times.
2. Wait a few minutes to allow initialization to
complete.
30
Take up slack
Too high
SET" button until the
SET" button until

Advertisement

Table of Contents
loading

Table of Contents