Table of Contents
Advertisement
TOYOTA SAFETY SENSE
DISABLING THE PRE-COLLISION SYSTEM (PCS)
(1) Press "
" switches and select
(2) Press "
" switches and select the
press "
". The setting screen is displayed.
(3) Select
and then press "
Press again to enable. You can press "
Note: The system is enabled each time the engine switch is turned to Ignition
On.
Lane Departure Alert with
Steering Assist function (LDA w/SA)
LDA in TSS-P uses an in-vehicle camera designed to detect visible white and yellow
lane markers in front of the vehicle and the vehicle's position on the road. If the
system determines that the vehicle is starting to unintentionally deviate from its lane,
the system alerts the driver with an audio and visual alert. When the alerts occur, the
driver must check the surrounding road situation and carefully operate the steering
wheel to move the vehicle back to the center part of their lane.
LDA is designed to function at speeds of approximately 32 MPH or higher on
relatively straight roadways.
In addition to the alert function, LDA w/SA also features a steering assist
function. When enabled, if the system determines that the vehicle is on a path to
unintentionally depart from its lane, the system may provide small corrective steering
inputs to the steering wheel for a short period of time to help keep the vehicle in its
lane.
™
from the Multi-Information Display (MID).
setting function from the MID and then
." The Pre-Collision System will be disabled.
" to go back to the menu.
28
Advertisement
Table of Contents
