Connecting To The App - Aqualisa iSYSTEM SMART User Manual

Connecting to the App

Home Wifi Network
Before starting you will need your Network Name (SSID code) and
password as they are required during the Aqualisa app setup journey.
These can normally be found on your internet router.
For Wifi set up, the Aqualisa SmartValve must be powered, but the
TM
shower must not be in use.
Permissions Request
During the process you may be requested to allow permissions
(e.g. location data), these are requirements from your app provider and
need your confirmation to ensure a successful set up and use of the app.
We do not retain, store or pass this information on to any third parties or
use this permission to access the GPS functionality of your phone.
Download and open the Aqualisa app on your
personal smart device and follow the instructions
to create Your Home profile before continuing with
this section.
An instructional video and information on
compatible devices are available by scanning the
QR code or by visiting aqualisa.co.uk/smartapp.
Refer to the troubleshooting section of this guide
for guidance and advice.
The Aqualisa app utilises the Instabug platform; this tool can be used to:
Report an issue, suggest an improvement, or ask a question.
If you experience problems connecting your shower, or with the app
functions, then an Instabug report can be raised. To trigger the Instabug
service either shake your smartphone from side to side or tap on the
message bubble then simply follow the instructions.
9