Aqualisa iSYSTEM SMART User Manual page 11

The LEDs will flash slowly to indicate the Aqualisa
SmartValve is connected to the Aqualisa app and
TM
will switch to being solid to indicate a successful
connection to your selected Home Wifi.
A successful connection message will provide
confirmation in the Aqualisa app journey and the LEDs
on the controller will turn off to indicate that the
shower is ready for use.
If connection is unsuccessful a message will appear in
your Aqualisa app. Redo the steps above or refer to
app troubleshooting on page 17 or at
www.aqualisa.co.uk/smartapp.
Smart Speaker Set up
Once the Aqualisa app is set up and the shower connected, go to the app for your
smart speaker and follow their instructions to add the Aqualisa home to your devices.
The Aqualisa app gives you the capability to operate your product
remotely using your mobile device. It is the responsibility of the user
to ensure that it is safe to remotely activate the water flow. Aqualisa
recommend that baths and showers in operation are not left unattended.
If the timer setting is adjusted within the Aqualisa app, then the shower
will run for the newly set duration, overriding the default maximum run
time. N.B. The water flow will stop at the end of the timer.
11