Greenlee IntelliBENDER 855GX Instruction Manual page 4

IMPORTANT SAFETY INFORMATION
• Keep guards in place and in
working order.
• Remove any tools from bender
before operating. Form habit of
checking to see that all tools are
removed from bender before
turning it on.
Failure to observe these warnings
could result in severe injury or death.
Extension cords:
• Use only three-wire, 12 AWG exten-
sion cords that have three-prong
grounding-type plugs and three-
hole receptacles that accept the
tool's plug.
• Do not use extension cords that are
longer than 30 m (100').
• Repair or replace damaged exten-
sion cords.
Failure to observe these warnings
could result in severe injury or death.
Pinch points:
• Keep hands away from bending
shoe, rollers, and conduit when
bender is in use.
• Support conduit when unloading.
Conduit can become loose and fall
if not properly supported.
Failure to observe these warnings
could result in severe injury or death.
Greenlee Tools, Inc.
855GX Electric Bender
• Reduce the risk of unintentional starting. Make sure
switch is in off position before plugging in.
• Never leave tool running unattended. Turn power
off. Do not leave tool until it comes to a complete
stop.
• Disconnect tools before servicing and when chang-
ing accessories such as shoes, rollers, and the like.
Accidental start-up could result in serious injury.
Failure to observe these warnings could result in
severe injury or death.
• Never stand on tool. Serious injury could occur if
the tool is tipped.
• Do not overreach. Keep proper footing and balance
at all times.
Failure to observe these warnings could result in
severe injury or death.
Adjust fork spacing to match fork tubes on bender.
Ensure brake is engaged before inserting forks into
fork tubes.
Failure to observe this warning could result in severe
injury or death.
• Select the appropriate conduit size and type before
bending.
• Select the appropriate shoe groove and support
roller for the type and size of conduit before
bending.
• Do not bend conduit over 96 degrees. Overbending
could result in the other shoe hook colliding with
the conduit.
Failure to observe these precautions may result in
injury or property damage.
4
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070