Using Wps To Connect To A Network; Printing A Network Status Sheet - Epson ET-2850 User Manual

Using WPS to Connect to a Network

If you have a WPS-enabled router or access point, you can use Wi-Fi Protected Setup (WPS) to connect
your product to the network.
1. Press the WPS button on your router.
2. On the product, press the
3. Press the arrow buttons to select Settings > Network Settings > Wi-Fi Setup > Wi-Fi
(Recommended).
4. Press the OK button to select Proceed.
5. Press the arrow buttons to select Push Button Setup (WPS) and press the OK button.
6. Follow the instructions on the LCD screen to complete WPS setup.
If the network connection is successful, the blue
Note: If the blue
Parent topic:

Printing a Network Status Sheet

You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the
2. Select Settings > Network Settings > Print Status Sheet.
home button, if necessary.
Wi-Fi icon is not displayed on the LCD screen, repeat these steps to try again.
Wi-Fi Protected Setup (WPS)
home button, if necessary.
Wi-Fi icon is displayed on the LCD screen.
37